How to adjust the pressure of air compressor
As an indispensable equipment in industrial production, air compressor's pressure regulation directly affects the performance and service life of the equipment. This article will combine the hot topics on the Internet in the past 10 days to provide a structured analysis of the pressure adjustment methods, precautions and common problems of air compressors to help users operate them efficiently.
1. Basic principles of air compressor pressure regulation
Air compressors adjust air pressure to meet the needs of different tools or equipment. The core components include pressure switches, regulating valves and gas storage tanks. When the air pressure reaches the set upper limit, the pressure switch cuts off the power supply; when it is lower than the lower limit, the motor is restarted.
| Part name | Function | voltage regulation correlation |
|---|---|---|
| pressure switch | Control motor start and stop | Directly determines the pressure range |
| regulating valve | Manual/automatic adjustment of output pressure | Precisely fine-tune air pressure |
| gas tank | Stable air pressure fluctuations | Indirectly affects the voltage regulation effect |
2. Step-by-step pressure regulation operation guide
1.Check initial state: Turn off the power and make sure the pressure gauge returns to zero.
2.Set pressure range: Turn the pressure switch knob (usually marked "+/-") clockwise to increase pressure and counterclockwise to decrease.
3.test run: Start the air compressor and observe whether the pressure gauge stops/starts within the target range.
4.Fine adjustment regulating valve: For more precise control, adjust the output pressure twice through the regulating valve.
| step | Operation content | Tool requirements |
|---|---|---|
| 1 | security check | none |
| 2 | Coarse pressure switch | Screwdriver (some models) |
| 3 | Observe the pressure gauge | none |
| 4 | Fine adjustment regulating valve | Wrench (some models) |
3. Popular issues and precautions
1.Unstable pressure: It may be due to gas tank leakage or pressure switch failure, and the sealing needs to be checked.
2.Frequent starts and stops: Check whether the pressure difference setting is too small. It is recommended to maintain a difference of 1-2Bar.
3.Security warning: Never exceed the rated pressure of the air compressor, otherwise it may cause the risk of tank explosion.
4. Differences in voltage regulation between different models
Based on the popularity of discussions across the Internet, the pressure regulation characteristics of three common types of air compressors are summarized:
| Air compressor type | Voltage regulating method | Typical pressure range |
|---|---|---|
| Piston type | Mechanical knob adjustment | 5-8Bar |
| screw type | Electronic panel control | 7-13Bar |
| Portable | Built-in non-adjustable | Fixed 3-5Bar |
5. Maintenance suggestions after pressure regulation
1. Drain water regularly: Water accumulation in the gas tank will cause pressure sensor errors.
2. Lubrication and maintenance: Ensure that the moving parts of the control valve are lubricated to avoid sticking.
3. Record data: Establish a pressure adjustment log to facilitate tracking of performance changes.
Through the above structured guidance, users can complete air compressor pressure regulation safely and efficiently. If you encounter a complex fault, it is recommended to contact professional technicians to handle it.
check the details
check the details
en
